Panasonic WJ-AV20 Operating Instructions Manual page 19

19
3 Press the DIAL button for 2 seconds or more to terminate
sequential dialing.
The dialog shown below appears on the monitor screen.
CANCEL SEQ. DIAL?
YES NO
←→:SELECT ENT:EXEC
DIAL:CANCEL ESC:CLEAR
• Move the cursor on [YES] by pressing the Direction button. Then press the
ENTER button to terminate sequential dialing.
• Move the cursor on [NO] by pressing the Direction button. Then press the
ENTER button to call the next site and continue sequential dialing.
When [YES] is selected on the above dialog, the dialog shown below
appears on the monitor screen.
It will be closed automatically after 10 seconds.
TERMINATE SEQ. DIAL
ESC:CLEAR
Note
The quick number 000 is originally set for Sequential Dialing at the factory. It is
not necessary to register it in the directory.