Receiving Registration [200]; Receiving Method Setup [210] - Panasonic WJ-AV20 Operating Instructions Manual

Receiving Registration ....................................................... [200]
Set the receiving operation method.
0 0 0 T O P
1 0 0 M O D E ↓ ( T R A N S M I T T E R )
2 0 0 R E C E I V I N G
3 0 0 D I R E C T O R Y / D I A L I N G
↓
4 0 0 S E T U P
5 0 0 C O N T R O L
6 0 0 M A I N T E N A N C E
7 0 0 R E M O T E
↑ ↓
: M O V E E N T : S E L E C T
2 0 0 R E C E I V I N G
2 1 0 R E C E I V I N G
2 2 0 L O C A L
2 3 0 C A L L I N G / C A L L E D
2 4 0 G R O U P
↑ ↓
: M O V E E N T : S E L E C T

Receiving Method Setup [210]

2 1 0 R E C E I V I N G
R E C E I V I N G
R I N G E R
← → : S E L E C T
↑ ↓
: M O V E
31
↓
R E G I .
↓
R E G I .
↓
↓
↓
S E T U P E D I T
E S C : C L E A R
d
R E G I .
↓
R E G I .
N O . R E G I . ↓
↓
N O . C H E C K
↓
I D C H E C K
E S C : P R V
R E G I .
M O D E : A U T O M A N U A L
: O N O F F
E S C : P R V
1 Move the cursor to item 200 in the TOP menu
by pressing the
the ENTER button.
The [200 RECEIVING REGI.] menu appears on the monitor
screen.
Move the cursor to the desired item by
2
pressing the or
ENTER button.
The selected item submenu appears on the monitor screen.
210: Set a receiving method.
220: Set a local number.
230 Enable or disable calling numbers and called
numbers to be checked
240: Enable or disable a group ID to be checked.
This item lets you set the receiving mode when calls are
received from the destination.
Move the cursor to the desired item parameter and select the
item mode by pressing the Direction buttons.
• RECEIVING MODE
AUTO: Calls are received automatically.
MANUAL: Calls can be received by pressing the DIAL
button.
The factory default setting is AUTO.
• RINGER
ON: Enables alert tone when a call is received.
OFF: Disables alert tone when a call is received.
The factory default setting is ON.
Notes
• The alert tone can be adjusted with the Ringer
Volume Control on the front panel, but cannot be
decreased to zero. If you wish to turn the alert off, set
the parameter to OFF in the RINGER item.
• The alert tone rings twice even in the automatic
receiving mode.
Dial-Up Standby
or button. Then press
button. Then press the