Figure 4 Multi-Ring On Multiple Lines Display; Remote Access - Aastra 6757i User Manual

Chapter 10, Multi-Ring
Example:
Internal
Corporate
Contacts
Line 25008..................ON
Line 25010..................OFF
Line 5587....................OFF
On
Off

Figure 4 Multi-Ring on Multiple Lines Display

Remote Access

Multi-Ring Remote Access is an added feature of Multi-Ring that allows you to remotely
change the Multi-Ring enable/disable status of lines on your phone. You can be another
Pointspan station user or an off-switch user dialing into Pointspan (via a trunk to
Pointspan).
Multi-ring remote access is initiated as follows:
•
The remote user dials a feature directory number set up with the new Multi-Ring
Remote Access.
•
The remote user dials a numeric feature code set up with the new Multi-Ring Remote
Access.
•
The Personal Id (PIN) assigned to a Voice Line provides security for that line so
unauthorized users cannot change the multi-ring status.
Your system administrator will provide these tools for Remote Access.
Using Remote Access
To access Poinspan, you can either dial a DID number defined as a Multi-ring access
number that contains the feature directory number, or you can dial into Pointspan over an
incoming dialed trunk and then enter the feature directory number or numeric feature
code.
Note:
Prompts are given by tone only.
116
Directory
News
More
Multi-Ring
Done
Aastra – 2737-007