Ricoh All in One Printer Operating Instructions Manual page 69

Message
Cannot detect
original size
Select scan size
Exceeded max.
number of search
results which
can be dis-
played. Max.:
nnn
(A figure is placed at n.)
You do not have
privileges to
use this func-
tion.
LDAP server
search timed
out. Check the
server status.
Specified group
contains some
invalid dest. Do
you want to se-
lect only valid
dest.?
Entered path is
not correct.
Please re-enter.
Exceeded max.
number of alpha-
numeric charac-
ters.
Cause
You have loaded paper of a size
not shown on the paper size se-
lector.
Search results have exceeded the
max. displayable number.
Privileges to use this function.
A network error has occurred
and connection has failed.
The specified group contains
some destinations for sending by
e-mail and some destinations for
sending by Scan to Folder.
The destination computer name
or folder name is invalid.
The maximum number of specifi-
able alphanumeric characters of
specifiable a path has been ex-
ceeded.
When a Message is Displayed
Solution
• Place the original correctly.
• Specify the scan size.
• When placing an original di-
rectly on the exposure glass,
the lifting/ lowering action of
the ADF triggers the automat-
ic original size detection proc-
ess. Lift the ADF, or ARDF by
more than 30 degrees. See
"Placing Originals", Copy Ref-
erence.
Search again after changing the
search conditions.
Contact the administrator.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of System Set-
tings. See "System Settings", Gen-
eral Settings Guide.
To select destinations for sending
by e-mail, press [Select] for the
message displayed on the e-mail
screen. To select destination for
sending by Scan to Folder, press
[Select] for the message displayed
on the Scan to Folder screen.
Check whether the computer
name and the folder name for the
destination are correct.
The maximum number of charac-
ters which can be entered for the
path is 128. Check the number of
character you entered, and then
enter the path again. See "Trans-
mission", Scanner Reference.
5
63