Ricoh All in One Printer Operating Instructions Manual page 38

Troubleshooting When Using the Facsimile Function
Problem
Misfeeds occur frequently. The number of sheets loaded ex-
Misfeeds occur frequently. The paper is damp.
3
Misfeeds occur frequently. The paper is too thick or too thin. Use recommended paper. See
Misfeeds occur frequently. The copy paper is wrinkled or
Copy paper becomes
creased.
Copy paper becomes
creased.
Copy paper becomes
creased.
Images appear only
partially coloured.
Coloured lines appear.
White lines appear.
Printed images contain
blots or are patchy.
32
Cause
ceeds the capacity of the machine.
has been folded/creased.
Printed paper is used.
The paper is damp.
The paper is too thin.
The paper is damp.
Exposure glass or scanning glass
is dirty.
A nozzle might be misfiring.
The ink may be dry or the nozzles
of the printheads may be clogged,
preventing effective discharge.
Solution
Load paper only as high as the
upper limit markings on the side
fences of the paper tray or bypass
tray. See "Copy Paper", About
This Machine.
Use paper that has been stored in
the recommended temperature
and humidity condition. See
"Copy Paper", About This Ma-
chine.
"Copy Paper", About This Ma-
chine.
Use recommended paper. Use
paper that has been stored in the
recommended temperature and
humidity condition. See "Copy
Paper", About This Machine.
User recommended paper. Do
not reuse copy paper that has
been already printed onto. See
"Copy Paper", About This Ma-
chine.
Use paper which has been stored
at the right temperature and hu-
midity condition. See "Copy Pa-
per", About This Machine.
Use recommended paper. See
"Copy Paper", About This Ma-
chine.
Use paper that has been stored in
the recommended temperature
and humidity condition. See
"Copy Paper", About This Ma-
chine.
Clean them. See p.123 "Maintain-
ing Your Machine".
Print the test pattern to check
whether a nozzle is misfiring.
Perform head cleaning, if neces-
sary. See p.94 "Maintenance".
If the machine has not been used
for a long time, print the nozzle
check pattern and perform head
cleaning, if necessary. See p.94
"Maintenance".