This Machine - Ricoh All in One Printer Operating Instructions Manual

Problem
Cannot print in duplex
mode.
Cannot print in duplex
mode.
Cannot print in duplex
mode.
Cannot print in duplex
mode.
The user code entry
screen is displayed.
The Authentication
screen appears.
The " Temperature
Alert. Turn main
power off, ad-
just room temp.
and wait a while
before restart-
"message ap-
ing.
pears, and print is
disabled.
" You do not have
privileges to
use this func-
tion. " is displayed.
Authentication failed.
Authentication failed.
Note
❒ If you cannot make copies as you want because of paper type, paper size, or
paper capacity problems, use recommended paper. See "Copy Paper", About

This Machine.

Cause
No hard disk drive is mounted on
your machine.
You cannot use paper in Bypass
Tray, One-Sheet Bypass Tray for
duplex printing.
[1 Sided] is selected for "Paper
Type".
You cannot select duplex printing
if the paper type is set to [Label Pa-
per], [OHP (Transparency)], [Thick
Paper], [Envelope], [Postcard], or
[Inkjet Postcard].
Users are restricted by user man-
agement.
Basic Authentication, Windows
Authentication, LDAP Authenti-
cation or Integration Server Au-
thentication is set.
The temperature inside the print-
er is too high or too low.
The use of the function is restrict-
ed to authenticated users only.
The entered login user name or
login password is not correct.
Cannot access the authentication
server when using Windows au-
thentication , LDAP Authentica-
tion, or Integration Server
Authentication.
When You Have Problems Operating the Machine
Solution
Duplex copying requires the op-
tional hard disk drive. See "Func-
tions Requiring Optional
Configurations", Copy Reference.
For duplex printing, select Tray
1-3 in the copier mode or with the
printer driver.
Select [On] or "Paper Type". See
"Paper Type: Paper Tray1-3",
General Settings Guide.
Select a paper type that allows
duplex printing. See "Paper Type:
Paper Tray1-3", General Settings
Guide.
Enter the user code (up to eight
digits), and then press {q}.
Enter your login user name and
user password. See "When the
Authentication Screen is Dis-
played", About This Machine.
Locate the printer in an environ-
ment where the temperature re-
mains between 10 and 32°C. See
p.119 "Where to Put Your Ma-
chine".
Contact the administrator.
Inquire the user administrator for
the correct login user name and
login password.
Contact the administrator.
1
7