Ricoh All in One Printer Operating Instructions Manual page 24

Troubleshooting When Using the Copy Function
Problem
The copy is grayed out
or a text pattern ap-
pears in the back-
ground of the copy.
Print is slanted.
2
Print is slanted.
Print is slanted.
❖ Combine
Problem
When using Combine,
parts of the image are
not copied.
Copies are not in cor-
rect order.
18
Cause
You have copied a copy-guarded
document protected from unau-
thorized copying.
The side fences in the paper feed
tray is not locked.
The paper is feeding in at a slant. Load the paper correctly. See p.71
The front cover is open.
Cause
You specified a reproduction ra-
tio that does not match the sizes
of your originals and copy paper.
You placed the originals in the in-
correct order.
Solution
Check the document. See "Using
[Data Security for Copying] ", Printer
Reference.
Make sure the side fence is
locked. See p.76 "Changing the
Paper Size".
"Loading Paper".
Make sure the right and lower
right covers are properly closed.
Solution
When you specify a reproduction
ratio using Manual Paper Select
mode, make sure that the ratio
matches your originals and the
copy paper.
(Select the correct reproduction
ratio before using Combine
mode.)
When placing a stack of originals
in the ADF, or ARDF, the last
page should be on the bottom.
If you place an original on the ex-
posure glass, start with the first
page to be copied.