Ricoh All in One Printer Operating Instructions Manual page 31

Message
Authentication
failed.
Connection with
LDAP server has
failed. Check
the server sta-
tus.
LDAP server
auth. has
failed. Check
the settings.
Exceeded max.
number of search
results which
can be dis-
played. Max.:
nnn
(A figure is placed at n.)
LDAP server
search timed
out. Check the
server status.
Specified group
contains some
invalid dest. Do
you want to se-
lect only valid
dest.?
Entered path is
not correct.
Please re-enter.
Sender's name is
not selected.
Specify sender's
name.
E-mail address
entered is in-
correct. Please
re-enter.
Cause
Authentication is not possible
from this machine.
A network error has occurred
and connection has failed.
The entered user name or pass-
word does not match that speci-
fied for LDAP authentication.
The number of search results has
exceeded the maximum number
of items that can be displayed.
A network error has occurred
and connection has failed.
The specified group contains
some destinations for sending by
e-mail and some destinations for
sending by Scan to Folder.
The name of the computer or
folder entered as the destination
is wrong.
The sender has not been speci-
fied.
The entered e-mail address is
wrong.
When a Message Appears
Solution
Contact the administrator.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of [System Set-
tings]. See "System Settings", Gen-
eral Settings Guide.
Make settings correctly for the
user name and the password for
LDAP server authentication.
Search again after changing the
search conditions.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of [System Set-
tings]. See "System Settings", Gen-
eral Settings Guide.
To select destinations for sending
by email, press [Select] for the
message displayed on the e-mail
screen. To select destination for
sending by Scan to Folder, press
[Select] for the message displayed
on the Scan to Folder screen.
Check whether the computer
name and the folder name for the
destination are correct.
A sender's name should be speci-
fied before sending e-mail. Send
e-mail after specifying the send-
er's name.
Make sure the e-mail address is
correct, and then enter it again.
3
25