Ricoh All in One Printer Operating Instructions Manual page 57

Problem Cause
Image position The correct page
differs from the layout settings
display. are not made.
Image position The envelope le-
differs from the ver setting is in-
display. correct.
Image position The printheads
differs from the are misaligned.
display.
Image position Print position
differs from the has not been ad-
display. justed.
Image position is The paper feed
displaced. has not been cor-
rectly adjusted.
The printed im- With certain
age is different functions, such
from the image as enlargement
on the compu- and reduction,
ter's display. image layout
might be differ-
ent to that on the
computer dis-
play.
The printed im- You might have
age is different selected to re-
from the image place TrueType
on the compu- fonts with ma-
ter's display. chine fonts in the
printing process.
Print is slanted. The tray's side
fences might not
be locked.
Print is slanted. The paper is
feeding in at a
slant.
Print is slanted. The front cover is
open.
Misfeeds occur The number of
frequently. sheets loaded ex-
ceeds the capaci-
ty of the
machine.
Misfeeds occur The paper is
frequently. damp.
Solution
Check that the size of the loaded paper matches that
specified in the printer driver's [Printout paper size:] dia-
log box. See the printer driver Help.
Set the lever according to paper type. See "When copy-
ing onto envelopes", Copy Reference.
Adjust the head positions. If they are still misaligned,
print the nozzle check test pattern, and then perform
head cleaning, if necessary. See p.94 "Maintenance".
Adjust the print position according to the paper tray.
Print the test pattern and adjust the print position ac-
cordingly. See p.94 "Maintenance".
Print the test pattern to adjust the paper feed. See p.94
"Maintenance".
In the application, change the layout, character size, and
character settings.
To print an image similar to that of the computer dis-
play, make settings to print TrueType fonts as an image.
See the printer driver Help.
Check the side fences are locked. See p.76 "Changing the
Paper Size".
Load the paper correctly. See p.71 "Loading Paper".
Make sure the right and lower right covers are properly
closed.
Load paper only as high as the upper limit markings on
the side fences of the paper tray or bypass tray. See
"Copy Paper", About This Machine.
Use paper that has been stored in the recommended
temperature and humidity condition. See "Copy Paper",
About This Machine.
Other Printing Problems
4
51