10
Application Programs
Counting
Purpose
With the Counting program you can determine
the number of parts that each have approximately
equal weight.
Available Features
– Store the current weight value to have it loaded
as the preset reference sample quantity next time
you initialize the Counting application
– The reference sample quantity can be changed
in the operating menu:
See "Configuring the Balance/Scale"
– The average piece weight is automatically
output via the optional data interface port after ini-
tialization, if the menu code for "Printout
with data ID codes" is set
– Press v to toggle the display between piece count
and weight
Factory Settings
Reference sample quantity: 10 (menu code 3. 3. 2)
Preparation
§ Configure the Counting application
in the operating menu:
See "Configuring the Balance/Scale"
Menu code 2. 1. 4
§ Reference sample quantity:
Menu code 3. 3. 1
Menu code 3. 3. 2
Menu code 3. 3. 3
Menu code 3. 3. 4
Menu code 3. 3. 5
See also "Configuring the Balance/Scale"
Counting
5 pcs
10 pcs
20 pcs
50 pcs
100 pcs