Sartorius Basic lite Operating Instructions Manual page 4

Installation Instructions
Your balance/scale is designed to
provide reliable weighing results under
normal ambient conditions. When
choosing a location to set up your bal-
ance/scale, observe the following so
that you will be able to work with
added speed and accuracy:
– Set up the balance/scale on a stable,
even surface
– Avoid placing the balance/scale in close
proximity to a heater or otherwise
exposing the balance/scale to heat or
direct sunlight
– Protect the balance/scale from drafts
that come from open windows or doors
– Avoid exposing the balance/scale to
extreme vibrations during weighing
– Protect the balance/scale from
aggressive chemical vapors
– Do not expose the balance/scale to
extreme moisture over long periods
4
Conditioning the Balance/Scale:
Moisture in the air can condense
on the surfaces of a cold balance/
scale whenever it is brought into a
substantially warmer place. If you
transfer the balance/scale to a
warmer area, make sure to condition it
for about 2 hours at room temperature,
leaving it unplugged from AC power.
Information
on Radio Frequency Interference
Warning!
This equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instruction manual, may cause
interference to radio communications.
It has been tested and found to comply
with the limits for a Class A computing
device pursuant to Subpart J of Part 15
of FCC Rules, which are designed to
provide reasonable protection against
such interference, when operated in a
commercial environment. Operation of
this equipment in a residential area is
likely to cause interference, in which
case the user, at his own expense, will
be required to take whatever measures
may be required to correct the
interference.