Detailed Menu Description; Home Menu - Sony SRR1000 Operation Manual

Memory storage unit
Hide thumbs Also See for SRR1000:
Table of Contents

Advertisement

Detailed Menu Description

HOME Menu

The HOME menu allows you to set the basic operation
modes for recording and playback.
Settings in the Setting column are the values that appear in
the menu display section of the screen. Underlined values
are the factory default settings.
Button
Indication
[F2]
FREEZE
[F3]
REF SEL
[F4]
EXT REF
[F5]
MON(L)
[F6]
MON(R)
[F8]
9Pin
ALT/[F8]
PREROLL
ALT/[F9]
REC INH1
Setting
Outputs a still picture (the picture that was playing just before the button was
pressed). Select the field or frame that specifies the still picture with the ALT/[F2]
(FRZ MODE) buttons in the SETUP menu. (see page 36)
Selects the signal to be the reference for operation of the unit.
Ext: Forces the reference signal to be external.
Input A, Input B, Input C, and Input D: Uses the signal from the HD SDI INPUT
connector of ports A to D as the reference signal.
Sets whether the reference signal is an HD signal or SD signal when using an
external reference signal.
HD
SD
Selects the audio channel output from the MONITOR OUTPUT L connector. (see
page 38)
After pressing the button, use the channel selection buttons to select channels 1 to
16.
Selects the audio channel output from the MONITOR OUTPUT R connector. (see
page 38)
After pressing the button, use the channel selection buttons to select channels 1 to
16.
Turn this On to enable the unit to be controlled from a device connected to a
REMOTE connector.
On
Off
Sets the preroll time. This can be set in 1 second increments.
To make the setting, press the ALT/[F8] buttons, use the cursor buttons or MULTI
CONTROL knob to set the value, and then press the ALT/[F8] buttons again.
0 to 5 sec to 30 sec
Sets record inhibit mode.
Off: Enables recording.
All: Prohibits all recording.
The Target column displays the following data.
Unit: Settings for the overall unit
In: Settings for the input ports
Out: Settings for the output ports
I/O: Settings for the input/output ports
Target
Out
Unit
Unit
I/O
I/O
I/O
Unit
Unit
43
Detailed Menu Description

Advertisement

Table of Contents
loading

Table of Contents