Denwa Communications DW-310P User Manual page 50

Codecs Settings
Disable
Codecs/Enable
Codecs
Advanced SIP Setting
Forward Type
Forward Number
No Answer Forward
Wait Time
Transfer Timeout
Enable Hot Line
Hot Line Number
Warm Line Wait Time Specify the Warm Line Time.
SIP Encryption
SIP Encryption Key
RTP Encryption
RTP Encryption Key
Enable Auto Answer
Auto Answer Timeout Specify Auto Answer Time, the phone auto answers
Enable Session Timer
Session Timeout
Subscribe for MWI
Use the navigation keys to highlight the desired one
in the Enable/Disable Codecs list, and press the
desired to move to the other list.
Select call forward mode, the default is Off.
Off: Close down calling forward.
Busy: If the phone is busy, incoming calls will be
forwarded to the appointed phone.
No answer: If there is no answer, incoming calls will
be forwarded to the appointed phone after a
specific.
Always: Incoming calls will be forwarded to the
appoint phone immediately.
The phone will prompt the incoming while doing
forward.
Specify the number you want to forward.
Specify the No Answer Forward Delay Time, if the
Forward Type is No answer, incoming calls will be
forwarded after the no answer forward wait time.
For the phone supports the transfer of certain
special features server, set interval time between
sending "bye" and hanging up after the phone
transfers a call.
Specify Hot Line by selecting it.
Specify Hot Line Number, the phone dial the hot
line number automatically at hands-free mode or
handset mode after warm line time.
Enable/Disable SIP Encryption.
Set the key for sip encryption.
Enable/Disable RTP encryption.
Set the key for RTP encryption.
Enable Auto Answer by selecting it.
the incoming call after Auto Answer Time.
Set Enable/Disable Session Timer, whether support
RFC4028.It will refresh the SIP sessions.
Set the session timeout.
Enable the Subscribe for MWI by selecting it, the
phone will send subscribe message for MWI to the
SIP Server.