Syslog - Denwa Communications DW-310P User Manual

Plug and Play
Enable PnP
PnP Server
PnP Port
PnP Transport
PnP Interval
Phone Flash
Server Address
Config File Name
Protocol Type
Update Interval
Update Mode
TR069 Settings
Enable TR069
ACS Server Type
ACS Server URL
ACS User
ACS Password
TR069 Auto Login
"Inform" Sending
Period

SYSLOG

8.3.6.2
Syslog is a protocol which is used to record the log messages with
client/server mechanism. Syslog server receives the messages from clients,
and classifies them based on priority and type. Then these messages will be
written into log by some rules which administrator can configure. This is a
better way for log management.
Enable PnP by selecting it, than the phone will send
SIP SUBSCRIBE messages to a multicast address when
it boots up. Any SIP server understanding that
message will reply with a SIP NOTIFY message
containing the Auto Provisioning Server URL where
the phones can request their configuration.
Specify the PnP Server.
Specify the PnP Server.
Specify the PnP Transfer protocol.
Specify the Interval time, unit is hour.
Set FTP/TFTP/HTTP server IP address for auto
update. The address can be IP address or Domain
name with subdirectory.
Set configuration file's name which need to update.
System will use MAC as config file name if config file
name keep blank. For example, 000102030405.
Specify the Protocol type FTP, TFTP or HTTP.
Specify update interval time, unit is hour.
Different update modes:
1. Disable: means no update.
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
Enable TR069 by selecting it.
Specify the ACS Server Type.
Specify the ACS Server URL.
Specify ACS User.
Specify ACS Password.
Enable TR069 Auto Login by selecting it.
Specify the "inform" Sending Period, unit is second.