Qos&Vlan - Denwa Communications DW-310P User Manual

NAT
Port Mirror
Enable Bridge Mode
Notice: When LAN IP or bridge mode status is changed, the system will
reboot!
If you choose the bridge mode, the LAN configuration will be disabled.
QoS&VLAN
8.3.2.3
The VOIP phone support 802.1Q/P protocol and DiffServ configuration. VLAN
functionality can use different VLAN IDs by setting signal/voice VLAN and
data VLAN. The VLAN application of this phone is very flexible.
amended automatically according to the IP address
and Netmask. You need reboot the phone and the
DHCP server setting will take effect.
Select NAT or not.
Select Port Mirror or not, it only works in bridge
mode, the function of the port mirror is that copy the
data stream from the WAN port to the LAN port of the
phone.
Select Bridge Mode or not: If you select Bridge Mode,
the phone will no longer set IP address for LAN
physical port,LAN and WAN will join in the same
network. Click "Apply", the phone will reboot.