Denwa Communications DW-310P User Manual page 43

HTTPS Port
Telnet Port
RTP Port Range
Start
RTP Port Quantity
Notice:
1) You need save the configuration and reboot the phone after set this
page.
2) Please REBOOT the system if you modify the HTTP or telnet port number
(the new number should be greater than 1024).
3) If you set 0 for the HTTP port, it will disable HTTP service.
Before using the https, you must download https
authentication certification into the phone, then
set web browser port, the default is 443 port, if you
want to enhance system safety, you'd better change
it into non-443 standard port. You can access to the
web in https after rebooting the phone.
Set Telnet Port, the default is 23. You can change the
value into others.
Example: The IP address is 192.168.1.70. The telnet
port value is 8023, the accessing address is telnet
192.168.1.70 8023.
Set the RTP Start Port. It is dynamic allocation.
Set the maximum quantity of RTP Port, the default is
200.