Denwa Communications DW-310P User Manual page 74

Field name
Contrast
Enable Backlight
Line Key Settings
Line: select Auto, SIP1, SIP2 or IAX2 in function key type. After you set it,
you pick up handset or hands-free, press this function key, and then you
can use the corresponding SIP line.
Function Key Settings
key
Type
Value
Line
Subtype
NOTICE：
 Memory keys can be configured through the following:
Speed Dial function, through the configuration of the key corresponding
to the number of ways as shown below.
User can press the F1 key to allocate this number by line1 line.
Intercom function, you can press this key in standby to automatically
answer the call and make each other.
User can be configured in accordance with push to talk function the way:
4116 was the other number; Then press the standby button and make it
automatically answer the call 4116.
 key can be configured through the following events:
For example:
Function Key
explanation
Set contrast of screen.
Set enable/disable backlight.
Show the function key's serial number.
Memory Key: settings can be stored in key storage
for each number, the standby or off-hook, select
the function keys on the keyboard can call this
number.
Line, set the dial mode (Auto, SIP1, SIP2,
IAX2).Key Event functions, monitor state.
DTMF: In the call, send DTMF.
URL: You can input remote book url.
Set the type parameter values.
Choose which lines to use this feature.
Select the function parameters Key Event and
Memory Event.