Web Configuration; Introduction Of Configuration; Ways To Configure; Password Configuration - Denwa Communications DW-310P User Manual

8

Web configuration

8.1

Introduction of configuration

8.1.1 Ways to configure

DW-310/DW-310P has three different ways to different users.
 Use phone keypad.
 Use web browser (recommendatory way).
 Use telnet with CLI command.

8.1.2 Password Configuration

There are two levels to access to phone: root level and general level. User
with root level can browse and set all configuration parameters, while user
with general level can set all configuration parameters except SIP (1-2) or
IAX2's that some parameters cannot be changed, such as server address and
port. User will has different access level with different username and
password.
 Default user with general level:
 Username: guest
 Password: guest
 Default user with root level:
 Username: admin
 Password: admin
The default password of phone screen menu is 123.
8.2

Setting via web browser

When this phone and PC are connected to network, enter the IP address of
the wan port in this phone as the URL (e.g. http://xxx.xxx.xxx.xxx/ or
http://xxx.xxx.xxx.xxx:xxxx/).
If you do not know the IP address, you can look it up on the phone's display by
pressing Status button.
The login page is as below picture.