Clickshare Launcher Installer - Barco ClickShare Installation Manual

Where to download the launcher installer?
The launcher service (installer) can be downloaded from the Base Unit when entering the webui. Go to Maintenance > Software
and download the launcher service.
Image 5-5
Downloads software
5.3

ClickShare launcher installer

Interactive setup
In this setup, user runs the installer and installs the ClickShare launcher to the computer after accepting EULA and specifying the
installation directory. Follow the instructions on the displayed screens.
Image 5-6
After the setup finished, the ClickShare launcher will be started automatically.
Silent setup
In this setup, a user or an IT admin can install the ClickShare launcher using the Windows command prompt. Following is an example
of a silent installation:
msiexec.exe /i ClickShare_Launcher_01_06_00_0144_Setup_Win.msi ACCEPT_EULA=YES INSTALLDIR=C:\
LAUNCH_APP=YES /qn
Parameter Description
AC- This parameter shows that the installer accepts the EULA text as is. This parameters must be set to YES
CEPT_EULA in order to continue to the installation.
INSTALLDIR This parameter specifies the installation directory for ClickShare launcher. If not specified, the default folder
will be the Program Files folder.
R5900004 CLICKSHARE 19/08/2014
5. Preparing the buttons
35