Advanced Settings: Hostname - Barco ClickShare Installation Manual

6. Web Interface
Image 6-20
Audio settings
How to change
1. Log in to the ClickShare web interface.
2. Click the Setup tab and then the Audio tab.
3. To enable audio on the Base Unit, check the check box next to Enable Audio Functionality.
Note: Changing the audio setting, requires a re-pairing of the Buttons.
4. To select the audio output method, click on the drop down box and select the desired output method.
- analog : output via mini jack
- digital : output via DisplayPort
Default setting : analog

6.11 Advanced settings: Hostname

Hostname
Hostnames are human-readable nicknames that correspond to the address of a device connected to a network.
How to change
1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
52 R5900004 CLICKSHARE 19/08/2014