6. Web Interface
Image 6-25
Access SSH
6.15 Advanced settings: Access web interface
About access
The web interface is always accessible via the Ethernet port. Access via the wireless interface can be enabled or disabled.
How to enable-disable
1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
3. To enable access via wireless interface, check the check box next to Enable access via wireless interface (3).
Image 6-26
Access web interface
6.16 Advanced settings: API configuration Settings
About API settings
The API can be enabled or disabled, that means that the access to unit from a external device can be given or can be blocked.
How to enable-disable
1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
56
R5900004 CLICKSHARE 19/08/2014