DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as
Readout. To select a different DMX address, hit the <SETUP> button and use
the <UP/DOWN> buttons to select the your desired starting DMX address,
then hit <SETUP> again to confirm your choice.
Auto, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.) To use the fixture in 7 channel or 26 channel mode, use the <MENU> but-
ton to scroll to
again and scroll to either
2.) To set the fixture in automatic mode, use the <MODE> button to scroll to
AU7O
auto programs
choice. Then you can adjust the chase speed. Use the <UP/DOWN> buttons to
adjust the chase speed setting from
the <SETUP> button. Now you can adjust the strobe speed by selecting the
speed adjustment settings of
3.) To set the fixture to run one of its 22 built-in chase patterns, use the
<MODE> button to scroll to
buttons to scroll through auto program choices of
<SETUP> button to confirm your choice. Then you can adjust the chase speed
of the program by using the <UP/DOWN> buttons and choose from
- SPFL
the strobe speed by selecting the strobe speed adjustment settings of
F599
4.) To use the fixture as a slave unit, use the <MODE> button to scroll to
and hit the <SETUP> button. Your fixture will then be in slave mode.
Sound Active Mode:
1.) To use this fixture in sound active mode, scroll to
button, and hit <SETUP>. Then using the <UP/DOWN> buttons, choose the
built-in sound active chase pattern from
can then adjust the chase speed by using the <UP/DOWN> buttons to adjust
the speed from
Manual Color Adjustment:
Allows the user to adjust the color balance of the fixture. These settings are global, they
will effect all modes.
1.) Use the <MODE> button to navigate to
2.) From here, you can navigate to
DOWN> buttons to adjust the global intensity of red, green, or blue from
- 255.
Weather System User Manual Rev. A
d001
and hit the <SETUP> button. Push the <SETUP> button
7-CH or 26CH.
and hit <SETUP>. Use the <UP/DOWN> buttons to scroll through the
n001 -n100
(slow <--> fast), and push the <SETUP> button. Now you can adjust
(slow <--> fast).
SP 01 - SP10
and push the <SETUP> button to confirm your
SP 01 - SPFL
FS 01 - F599
(slow <--> fast).
Pr--,
and hit <SETUP>. Use the <UP/DOWN>
SU01 - SU31
(slow <--> fast).
Colr
r255, 9255,
Page 12
d001
on the LED
(slow <--> fast), and push
Pr01 -Pr22
and push the
SU--
using the <MODE>
and hit <SETUP>. You
and hit the <SETUP> button.
b255
or
and use the <UP/
Copyright (c) 2012 Blizzard Lighting, LLC
SP 01
FS 01 -
SLAu
000