To Set The Serial Port Speed Back To The Default - Sun Microsystems Sun Fire V210 Product Notes

To set the serial port speed back to the default

value
Type :
sc> bootmode reset-nvram
sc> reset
Do not use 16-character usernames
If you log in to ALOM with a 16-character username and execute the showusers
command, ALOM enters a loop and refuses other connection attempts.
If you encounter this problem, telnet into the host server and use the scadm
resetrsc command to reset ALOM.
Incorrect message is output and logged when
POST failure is received
When OpenBoot PROM (OBP) reports memory DIMM errors to ALOM, it sends SC
alert messages with the incorrect memory slot position for the Sun Fire V210 and
V240 servers. However, the memory errors are still valid.
Swapping system configuration cards between
platforms
If you remove the system configuration card (SCC) and replace it with the SCC from
a system of a different platform type, the card will be reconfigured.
A message tells you when this has been done, but the system does not request
confirmation before reformating the card. Therefore, take care when swapping
system configuration cards, particularly between systems of different platform types.
18 Sun Fire V210 and V240 Servers Product Notes • February 2004