Power Management Setup - EPOX EP-8HDA5J User Manual

BIOS
ECP Mode USE DMA
This field allows the user to select DMA1 or DMA3 for the ECP mode.
Options: DMA1, DMA3.

4-5 Power Management Setup

Choose the "Power Management setup" in the CMOS Setup Utility to display the
following screen. This menu allows the user to modify the power management
parameters and IRQ signals. In general, these parameters should not be changed
unless it's absolutely necessary.
ACPI Suspend Type
This item allows you to select S1(Power-On-Suspend) or S3(Suspend-To-RAM)
function.
Options: S1(POS), S3(STR), S1&S3.
Power Management Option
Use this to select your Power Management selection. The default is User define.
Max. saving: Maximum power savings. Inactivity period is 1 minute in each mode.
Min. saving: Minimum power savings. Inactivity period is 1 hour in each mode.
User define: Allows user to define PM Timers parameters to control power saving
mode.
Page 4-16
Figure 6: Power Management