Start Recording - Kenwood NV-701 Instruction Manual

Select CD, TUNER, or MD/DVD
(NV-301 only) or VIDEO/6ch IN
(NV-701 only) input for the source.
CD CD
TUNER TUNER
BAND BAND
TAPE TAPE
MD/DVD VIDEO/6ch IN
NV-301 NV-701
SET
5 5
To pause recording (Main unit only)
SET
÷ Pressing the SET (¶) key pauses recording after
leaving a non-recorded space of about 4 seconds.
÷ If the key is pressed again in less than 4 seconds after it
has been pressed, recording resumes from that instant.
4. Select the source to be recorded. (Except for TAPE
input)
Press the desired key.
C D 0 1
The input source component to
4 4
be recorded should be displayed.
÷ If a disc has already been loaded when the CD input is selected, it starts to
play automatically. In this case, press the 7 (stop) key to stop it.
÷ When you select VIDEO/6ch IN (NV-701 only) or MD/DVD (NV-301 only) to
record the external input, adjust the input level. Q

5. Start recording.

1
Start recording.
2
Play (or tune) the input source to be recorded.
Lights
REC
(SW channel
L R
lights for
SW
NV-701 only)
0 : 0 2
÷ If a disc has already been loaded
Lights
÷ Recording stops automatically
REC
•
L R
÷ Press the stop (7) key of the cas-
SW
(SW channel lights
for NV-701 only)
Let's record
when the CD input is selected, it
will starts recording automatically.
when the tape side(s) to be re-
corded have been fully recorded.
sette deck unit to stop recording
(see the next page).
35