Clock Adjustment - Kenwood NV-701 Instruction Manual

Clock adjustment

This unit incorporates a clock function. It is necessary to set the correct time before using the timer
functions. The time can be displayed only while the power is in standby.
1
Select "Clock Options".
MULTI CONTROL
MENU
DEMO
2
Select "Adjust Time".
MULTI CONTROL
3
Adjust the hour.
MULTI CONTROL
To decrease To increase
the figure the figure
4
Adjust the minute.
MULTI CONTROL
To decrease To increase
the figure the figure
5
Start the clock.
ENTER
To display the time
(In standby mode or when the MD/DVD (NV-301
only) or VIDEO/6ch IN (NV-701 only) input is
selected.)
ENTER
(Displayed for approximately 5 seconds)
SET
SET
SET
SET
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
("CD Program Play")
("Recording Options")
"Tape Options"
"Audio Options"
"Clock Options"
"Surround Options" (NV-701 only)
+"Clock Options" is scrolled in the display
C l o c k O p t i o n
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
"Sleep Timer"
"Adjust Time"
"Timer Play"
"Auto Power Save"
Example: Setting the time to 8:45 in the morning
8 : 0 0
(For U.K. and Europe)
0Ô1Ô2...13Ô14...Ô0 ...
÷ The time display starts to blink.
÷ Press the SET key. The hour is entered and the minute
display starts to blink.
8 : 4 5
(For U.K. and Europe)
00Ô01Ô02...59Ô00Ô01...
÷ Press the BACK key to return to the previous step and
restart operation from there.
÷ To set the time precisely, press the ENTER key at the
same moment as a time announcement.
÷ The clock is reset and the clock display blinks if the power
cord has been unplugged from the AC power outlet and
plugged in again, or after a power failure. In this case, set
the time again.
A M 8 : 0 0
(Other countries)
AM12ÔAM1ÔAM2...
PM1ÔPM2...ÔAM12 ...
A M 8 : 4 5
(Other countries)
19