Start Recording - Kenwood XD-981MD Instruction Manual

Pause the recording
÷ Press the key again to resume recording. At this time, the track
number is incremented by "1".
÷ Recording can also be started by pressing the record (¶ REC) key.
Check the remaining recording time.
Press during recording or during recording pause.
DOT
DISPLAY
TITLE SEARCH
0 0 1
¶
REC
3 3
0
4 4
Blinks
MD
EDIT
V R 5 4 : 3 2
The recordable time for
the MD is displayed.

3. Start recording.

1 Press the record (¶ REC) key.
(Recording pause status is
reached.)
2 When the preparations have been
made, press the recording (¶ REC)
key again.
3 Play the music source to be re-
corded.
4. Remove the minidisc after the end of recording.
Always remove the minidisc after recording.
"WRITING" displayed during the minidisc ejection operation indicates that the data
associated with recording or editing is being written on the disc. Do not apply vibra-
tion or shock to the unit while this message is displayed.
In regard to display messages
Recording is not possible when one of the following messages
is displayed.
"DISC FULL" : The minidisc is full.
\ Erase unrequired tracks.
"PROTECTED" : The write protect tab is open.
\ Close it.
"PLAY ONLY" : The minidisc is only for playback.
\ Insert a recordable disc.
Stop the recording
÷ For recording from a CD, read "ONE TOUCH
EDIT recording".
31
Let's put out some sound Let's recording
XD-981MD (En)
ÁA
5
WE