Start Recording - Kenwood AX-7 Instruction Manual

Recording to a digital audio player
1 Press the MODE key, turn
the INPUT SEL./MULTI
CONTROL knob to select
"D.AUDIO OUT".
press the SET key.
÷ The Rec Out indicator (LED)
lights up.
2 Confirm "REC OUT ON" and
set by pressing the SET
key.
After use, switch off the power for both units, and then disconnect the digital audio player con-
necting cord from the terminal of this unit.
50 EN
4. D.AUDIO setting
Switch the output of the D.AUDIO (PHONES) terminal of this unit
from headphones output to digital audio recording output.
Then
÷ Operation at the time of "REC OUT ON" causes return to "HEADPHONE".
÷ Please note that the volume may become high when switch-
ing "D.AUDIO OUT" while using headphones.
÷ Please pay attention to the volume setting as sound will
come from the speakers when switching to "REC OUT ON".
5. Preparing for recording
÷ Perform options setting for external recording.Q
÷ Please refer to the instruction manual of the digital audio player for the
recording settings for the digital audio player.

6. Start recording

1 Start recording with the digital audio player.
÷ For details, refer to the instruction manual of the digital audio player.
2 Start playback of the source (audio source) with this unit.
÷ When recording has been completed, perform the operation of step 4
to return to "HEADPHONE".
÷ Return to "HEADPHONE" is made when the power is switched off.
÷ When CD repeat and/or program settings are made, the set contents
can be recorded.