Tape Playback - Kenwood NV-701 Instruction Manual

28

Tape playback

Start playback
(TAPE (2 3))
NV-301
TAPE
2 2
NV-701
To stop playback
(7 (stop))
1. Load a cassette tape.
1
Open the cassette holder.
2
Insert a tape and close the door.
Be sure to load the top of the
tape in the cassette holder first
with the side you want to play
facing up.
÷ Normal (TYPE ) or high (TYPE ) tape selection is set automatically.
÷ Remove tape slack before loading.
÷ Close the door securely.
2. Select the TAPE input.
The deck starts playback.
÷ Each time you press the TAPE (2 3) key, the playback direction changes.
Playback direction
indication
Reverse mode indication
÷ If the tape transport direction is opposite to the desired direction, press the
TAPE (2 3) key to reverse the direction.
When the power is off:
By loading a tape in the cassette deck beforehand,
simply pressing the play key automatically turns the
power ON and sets the function selection to Tape.
1 1
2 2
•
L R
SW
Let's have sound
To wind tape at
high speed
(MULTI CON-
TROL keys)
To stop playback
(7 (stop))
Lights up when a tape is
present in the cassette holder.
Active audio channels
(SW channel lights for NV-
701 only)