Kenwood NV-701 Instruction Manual page 30

30
To reduce noise in playback
You can select Dolby NR (Noise Reduction) to
reduce high frequency noise and improve the
sound of audio playback when listening to
tapes.
1
Select "Tape Options".
MENU
DEMO
MULTI CONTROL
SET
2
Select "Dolby–NR".
MULTI CONTROL
SET
3
Turn Dolby NR on or off.
MULTI CONTROL
The following items can be selected by press-
ing the MULTI CONTROL keys repeatedly.
"Dolby NR–ON": Add noise reduction
to the audio playback.
"Dolby NR–OFF": Play the cassette tape
without any noise reduction
processing.
4
Save the setting and exit the mode.
ENTER
"Tape Options"
"Audio Options"
"Clock Options"
"Surround Options" (NV-
701 only)
"Reverse Mode"
"Dolby–NR"
Lights up when
Dolby NR is on.
SET
NR
Transport direction indicators
The indicators (2 , 3) indicate the current direction
in which the tape advances when playback or record-
ing is started automatically by the one-touch opera-
tion function, etc. This direction is the direction stored
in memory when tape playback was last stopped.
(To switch the tape transport direction, press the
TAPE (2 3) key to reverse the direction, then press
the 7 (stop) key.)
Tape direction indicators
•
L
(SW channel lights for
NV-701 only)
A tip for the use of the tape counter
The tape counter is set to "0000" when a cassette tape
is loaded. In case you want to interrupt recording
(playback) in the middle of the tape, the counter read-
ing will be helpful as a reference for locating the same
location when continuing the recording (playback)
the next time. The tape counter figure decrements
during recording or playback of the reverse side
(while the 3 tape transport indicator is lit).
To reset the tape counter to "0000", open the cassette
holder once. The counter will be reset.
N - T A P E
"N–TAPE" or "C–TAPE" appear to indicate whether
the tape in the cassette deck is normal or high bias.
Let's have sound
R
SW
0 0 0 0