Connecting The Speakers - Kenwood NV-701 Instruction Manual

6

Connecting the speakers

When connecting the speakers, be sure to keep in mind the following points regarding speaker connection.
÷ Never short-circuit the "+" and "–" speaker cords.
÷ If the left and right speaker connections or the "+" and "–" polarity are inverted, the sound will be unnatural with unclear
positioning of musical instruments, etc. Be sure to connect the transparent cord and striped cord of the speaker cable to
the matching terminals on the speakers and the main unit.
÷ (NV-701 only) When all connections are complete, be sure to perform the "Setting up for surround sound"
operations to ensure the best possible surround sound from your system.
Main Unit
1 2
Twist
Speaker Unit
1 2
Twist
Front speakers (NV-301 only)
Speaker (right)
– +
Speaker cord
SPEAKERS
+
–
3
3
Speaker (left)
– +
(6 – 16 )
R L
Surround speaker system (NV-701 only)
4
Speaker cords are supplied with this unit. Use the 2 m (6
ft.) speaker cords for the front and center speakers, the 8
m (26 ft.) speaker cords for the surround speakers, and the
3 m (10 ft.) speaker cord for the subwoofer.
Be sure to match the colored terminals on the speakers
with the similarly labeled terminals on the main unit as
follows:
4
Front Right speaker: RED
Front Left speaker: BLUE
Center speaker: GREEN
Surround Right speaker: ORANGE
Surround Left speaker: GRAY
Subwoofer: BROWN
Center
Speaker
(Right)
Surround Speakers
System connection
Front Speakers
(Right) (Left)
+
–
R L
GREEN RED BLUE
CENTER FRONT
+
–
R L
ORANGE GRAY BROWN
SURROUND SUBWOOFER
(Left)
Subwoofer
)