Receiving Broadcast Stations - Kenwood NV-701 Instruction Manual

Receiving broadcast stations

It is also possible to receive stations by one-touch
operations.
BAND
NV-301
TUNER
BAND
1 1
MULTI CONTROL
P.CALL
4 ¢
1 TUNING ¡
NV-701
1. Select the broadcast band.
Each press changes the band.
1 FM
2 AM
÷The broadcast bands defer depending on the model (country or area).
Example when an FM station is received
FM
2. Select the tuning mode.
The following tuning modes can be selected by pressing the MULTI
CONTROL keys repeatedly.
"Auto/Stereo" (Auto tuning)
2 2
"P. call on" (Preset call)
"Manual/Mono" (Manual tuning)
÷ Normally, use the "Auto/Stereo" (Auto tuning) mode.
÷ Use the "Manual/Mono" when reception is noisy due to weak reception. (In
the manual mode, stereo broadcasts are received in monaural.)
÷ When the P.CALL keys on the remote control unit are pressed, "P. call on"
is displayed and the preset call mode is automatically selected.
Continued on next page...
When the TUNER key is pressed, this unit
will be switched on automatically and
tuned to the last received frequency.
1 FM
or
2 MW (AM)
3 LW
STEREO
AUTO
- - • • 9 8 . 7 5 M H z
Let's have sound
3 3
One-by-one
presetting
(ENTER)
1 1
2 2
31