Recording Programmed Tracks (Cd Program Recording) - Kenwood NV-701 Instruction Manual

48
Recording programmed tracks
Program the desired tracks from up to 3 CDs in
the order you want and record the programmed
playback onto tape.
Recording preparations are required. ›
1
Select "Recording Options" .
MULTI CONTROL
MENU
DEMO
2
Select "CD Program Recording".
MULTI CONTROL
3
Program the desired tracks.
1
Select tracks in the order you want to
play them. (Perform step 3 on page 37.)
2
Check, replace, add or delete the pro-
grammed tracks as required.
(Perform steps 1 and 2 on page 38.)
4
Start recording.
ENTER
To end recording in the middle
÷ Both the cassette deck and CD player stop.
(Steps 1 to 4)
SET
SET
ENTER
(CD PROGRAM RECORDING)
When effects are applied to the sound, the
effect applied to the sound can be re-
corded.
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
"CD Program Play"
"Recording Options"
"Tape Options"
"Audio Options"
"Clock Options"
"Surround Setup" (NV-701 only)
+"Recording Options" is scrolled in the display
R e c o r d i n g O p
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
"CD Direct Recording"
"CD Program Recording"
"Timer Recording"
"Digital Rec Mode" (NV-701 only)
+"CD Program Recording" is scrolled in the display
C D P r o g r a m R
+"Press "ENTER" to Start, "MULTI" to Edit
and Check" is scrolled in the display
P r e s s " E N T E R
÷ The program mode is maintained even after recording is
completed. To return to the normal playback mode,
cancel the program playback mode.
Convenient CD recording
R
Lights
PGM
°