Let's Record; Recording Onto A Tape - Kenwood NV-701 Instruction Manual

Let's record

34

Recording onto a tape

TAPE
2 2
MENU
DEMO
3 3
Note Note
1 1
5
5
2 2
4 4
1. Load a cassette tape.
1 Open the cassette holder.
2 Insert a tape top end first with the
side you want to record on the top.
3 Close the holder.
÷ Differentiation between normal (TYPE
and high (TYPE ) tape is set automatically.
÷ Remove tape slack before loading.
2. Select the tape transport direction.
To reverse the transport direction
1 Select the TAPE input by press-
ing the TAPE key.
2 Press the TAPE key so that the
desired direction indicator ap-
•
pears.
3 Stop playback by pressing the
7 (stop) key.
3. Set the recording condition.
Select the reverse mode.
Note that this cassette deck cannot record onto
Metal tapes.
3
3
)
÷ When recording is started, the
tape is transported in the direction
selected in this step.
÷ Wind the tape to the position
where recording is to be started.
ª