Start Recording - Kenwood HM-582MD Instruction Manual

Pause the recording
÷ In record-pause mode, press the same key again to resume
recording from the same position. Note that the track
number increments at this time.
÷ Recording can also be started by pressing the rec key.
÷ When recording CD playback, pressing the CD 6 key lets
both MD recording and CD playback pause temporarily. To
resume the CD playback and MD recording together, press
the CD 6 key again.
3. Make the preparations for recording.
TUNER (Broadcasts) : Select a station
CD
AUX
Analog recording
Digital recording
÷ The recording format can be selected according to the input source as required.
(REC INPUT)
÷ The input level of an external input source can be selected as required.
(AUX A. LEVEL/AUX D. LEVEL)
÷ When recording an MD, the track number assignment can be selected as required.
(REC TNO MARK)

4. Start recording.

1 Press the rec key. (the unit enters record-pause mode)
2 When the preparation is complete, press the rec key again.
÷ When the input source is a CD, the MD recording starts at the same time as the
CD 6 key is pressed. (Synchronized recording)
3 Play (or tune) the music source to be recorded.
5. After recording , eject the MD.
÷ Be sure to eject the MD after recording. The data on the recording is written in the
MD while "WRITING" is displayed, then the disc is ejected.
While "WRITING" is displayed, do not apply shock or vibra-
tion to the unit because information is being written on the
Note Note Note
Mini Disc.
Stop the recording
: Enter pause mode at the beginning of the track
to be recorded.
: Make preparation for tuning or playback.∏
: Set the MONITOR mode of the menu to "ON"
then make preparation for tuning or playback.
›
fi
›
÷ If the key is pressed during recording from a CD, the CD
playback also stops.
Contents
33
Recording on MD
›∏