Clock Adjustment - Kenwood XD Series Instruction Manual

Clock adjustment

54
This unit incorporates a clock function. Be sure to adjust
the correct time before using the timer function.
The time is displayed only w hile the pow er is off.
1
Activate the clock adjustment mode.
2
Select "TIM E SET".
3
Enter the figure of hour.
4
Enter the figure of minute.
Downloaded from: http://www.usersmanualguide.com/
1
M ULTI
CON TROL
2 Press the SET key.
SET
1
M ULTI
CON TROL
To decrease
the figure
2 Press the SET key.
SET
1
M ULTI
CON TROL
To decrease
the figure
2 Press the ENTER key.
EN TER
SLEEP
TIM E SET
O.T.T.
PROG. ON/ OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
÷ The time display starts to blink.
Example: Adjustment to 8:45
To increase
the figure
AM 12ÔAM 1ÔAM 2...PM 1ÔPM 2...Ô RETURN ÔAM 12...
÷ The time of the day is represented in 12-hour AM /PM method.
÷ Press the SET key. The hour is entered and the minute display starts
to blink.
00Ô01Ô02...59Ô RETURN Ô00Ô01...
To increase
the figure
÷ If you made a mistake, select " RETURN" and press the ENTER key and
restart the entry.
÷ To adjust correct time, press the ENTER key at the same moment as
a time announcement.
÷ The " - - : - -" display appears after a pow er failure or w hen the pow er
cord has been unplugged from the AC outlet and plugged again. In such
a case, adjust the clock again.
Adjust the clock before setting the timer.
s E T
A M 8 O 0
A M 8 4 5
XD-SERIES (En)
C L O C K
A M 1 2 O 0