Clock Adjustment - Kenwood XD-750 Instruction Manual

Clock adjustment

5 0
This unit incorporates a clock function. Be sure to adjust
the correct time before using the timer function.
The time is displayed only w hile the pow er is off.
Ensure that the pow er is OFF.
1
Activate the clock adjustment mode.
2
Enter the figure of hour.
1
3
Enter the figure of minute.
1
Downloaded from: http://www.usersmanualguide.com/
AUTO
M ULTI CON TROL
/ VOLUM E
To decrease
the figure
2
EN TER
M ULTI CON TROL
/ VOLUM E
To decrease
the figure
2
EN TER
Example: Adjustment to 8:45
÷ The time display starts to blink.
To increase
the figure
÷ The time of the day is represented in 12-hour AM /PM method.
÷ Press the ENTER key. The hour is entered and the minute display starts
to blink.
To increase
the figure
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the ENTER key at the same moment as
a time announcement.
÷ The time display blinks after a pow er failure or w hen the pow er cord has
been unplugged from the AC outlet and plugged again. In such a case,
adjust the clock again.
Adjust the clock before setting the timer.
A M 1 2 ) : )
A M 8 ) : )
A M 8 4 5 :
XD-7 5 0 / 7 0 0 / 5 5 0 / 5 0 0 (En)