Clock Adjustment - Kenwood XD-A83 Instruction Manual

Clock adjustment

16
This unit incorporates a clock function. Be sure to adjust to the correct time before using the timer
function. The time can be displayed only while the power is off.
1
Switching the power ON (OFF).
2
Select "Clock Options".
MENU
3
Select "Adjust Time".
4
Adjust the hour.
To decrease
To increase
the figure
the figure
5
Adjust the minute.
To decrease To increase
the figure the figure
To display the time
(In standby mode)
(Displayed for approx. 5 sec.)
STANDBY
TIMER
SELECT
SELECT
SELECT
ENTER
When the power is ON, pressing the STANDBY key
enters the power STANDBY mode, in which the
standby indicator lights up.
The following items can be selected by turning the
MULTI CONTROL jog dial.
"CD Program Play"
"Recording Options"
"Tape Dubbing"
"Audio Options"
"Clock Options"
"Surround Setup"
"Language Options"
C l o c k O p t
The following items can be selected by turning the
MULTI CONTROL jog dial.
"Sleep Timer"
"Adjust Time"
"Timer Play"
"Auto Power Save"
Example: Adjustment to 8:45
8 : 0 0
(For U.K. and Europe)
0Ô1Ô2...13Ô14...Ô0 ...
The time display starts to blink.
Press the SELECT key. The hour is entered and the
minute display starts to blink.
8 : 4 5
(For U.K. and Europe)
00Ô01Ô02...59Ô00Ô01...
Press the BACK key to return to the previous step and
restart operation from there.
To adjust correct time, press the ENTER key at the same
moment as a time announcement.
The clock display blinks after the power cord has been
unplugged from the AC power outlet and plugged in
again or after a power failure. In this case, set the time of
the day again.
+Scrolled display
i
(Clock Options)
8 : 0 0 a m
(Other countries)
AM12ÔAM1ÔAM2...
PM1ÔPM2...ÔAM12 ...
8 : 4 5 a m
(Other countries)