Recommendations - JTS US-1000D-TH Instruction Manual

2. Sensitivity adjusting
-The sensitivity control(AF level control) is in the up-left of the transmitter's
back. Please use the adjusting sticker to adjust the proper level.
3. To activate "Lock mode"
-Hold on to UP button for 3 seconds to activate "Lock mode",
press again to unlock.
(Prevent accidental programming or switching off)
(4) With CX-508W Wind Microphone
1. Outsanding for saxophone, brass, woodwind instruments. (Figure 10)
2. Flesible gooseneck together with adjustable axis allow accurate sound source aiming.
(Figure 11)
3. Clamp with elastic grip ensures stable holding instrument without damaging
(Figure 12)
4. Windscreen to prevent pop noise effectively. (Figure 13)
(Figure 10) (Figure 11)
8. Recommendation
1. In order to achieve the optimum reception condition and also extend the operating
distance, please leave a "open space" between the receiver and transmitter.
2. Keep the devices away from the metal objects or any interference sources, at
least 50 cm.
3. To avoid the feed-back effect, don't leave the mic. to aim at the speakers directly.
4. For best pick-up pattern, please hold the middle of the mic. body.
5. Remove batteries from the battery compartment when the transmitter will not be
used for a long time.
6. When you need to replace the batteries, please replace both batteries at the same
time with new ones.
~16~
AF level control
Audio adjusting sticker
(Figure 12) (Figure 13)