Optional Accessories; Preparing Procedures & Basic Operation - JTS US-1000D-TH Instruction Manual

(3) CM-204 Headset Microphone
Microphone
1.
Gooseneck
2.
Neck-Frame
3.
Mini XLR
4.
Windscreen
5.
(4) CX-504 Headset Microphone
Microphone
1.
Gooseneck
2.
Neck-Frame
3.
Mini XLR
4.
Windscreen
5.
(5) CX-508W Wind Microphone
Microphone
1.
Gooseneck
2.
Neck-Frame
3.
Mini XLR
4.
Windscreen
5.

4-5 Optional Accessories

Dual Rack Adaptor Set
1.
Guitar Cable
2.
RP-900
~6~
DR-900 GC-80
5. Preparing procedures & basic operation
5-1 US-1000D-TH Receiver
(1.) Power output connector
Plug in one end of AC/DC adaptor cable to DC input socket in the rear
panel of receiver, and plug another end into an AC outlet
(Step 1 of Figure 1)
(2.) Audio Output Connector
Connect one end of the AF output cable to the AF output socket in the
rear panel, then plug another end to the "MIC IN" input socket of a mixer
or amplifier.(Step 2 of Figure 1).
Receiver equipped with balanced XLR output and Unbalanced.3mm
output, choose the proper way for use.
(Figure 1)
~7~