Setting Up The Hands-Free Phone - Kenwood DNX5360 Instruction Manual

Hands-Free Phoning

Setting Up the Hands-Free Phone

The Hands-Free system can be set as follows.
1 Display the Hands-Free Control screen
See <Making a call> (page 46).
2 Display the Hands Free Setup screen
3 Set each item
[Auto Response] Sets an automatic response
time to pick-up an incoming call. (
"OFF": This function is disabled.
"0-99": Sets the incoming call ringing duration
(in seconds).
[Call Beep] Sets the beep of the incoming call.
( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[SMS Receive Beep] Sets the beep of the
incoming SMS. (
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list,
incoming calls list and missed calls list.
( "ON")
"ON": Yes.
"OFF": No.
50 DNX5360/DNX5360M/DDX5036/DDX5036M
"8")
"ON")
[SMS Use] Sets the SMS function. (
"ON": Use SMS function.
"OFF": SMS not available.
[Key Word] Registers the voice to select phone
number category with voice recognition.
See <Key Word Voice Registration> (page 52).
[Use Phone Voice Recognition]
Sets whether to dial using the phone voice
recognition function. (
⁄
• Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
"ON")
"ON")