Bluetooth Unit Connection; Bluetooth Hands-Free/Audio Output Setup - Kenwood DNX5360 Instruction Manual

Bluetooth Unit Connection

Selects the Bluetooth unit to connect.
1 Display the Bluetooth Setup screen
>
Touch [ ] [ ]
(page 59)
2 Display the Connect Device List screen
3 Select a registered Bluetooth unit
4 Select the service to use
[TEL (HFP)] Connects/disconnects cell-phone
to use for Hands Free.
[Audio (A2DP)] Connects/disconnects Audio
player to use for Bluetooth Audio.
[Remove] Deletes registration (pairing).
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
>
[Bluetooth SETUP].
Bluetooth Hands-Free/Audio Output
Setup
Selects speakers to output the sound of hands-
free phoning (such as phone call voice and
ringing tone) and Bluetooth audio.
1 Display the Bluetooth Setup screen
>
Touch [ ] [ ]
(page 59)
[Bluetooth HF/Audio] Sets the output
speakers. ( "Front Only")
"Front Only" : Outputs from the front speakers.
"All" : Outputs from all the speakers.
>
[Bluetooth SETUP].
English 69