Setting Up The Hands-Free Phone - Kenwood KVT-514 Instruction Manual

Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
D
Display the Hands Free Setup screen
D
Setup each item
OJ
Moves to the "Hands Free Setup 2" screen.
[II
Sets an automatic response time after call
termination.
([2]
'8")
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
[l]
Sets a ringing tone output position.
([2]
"Front All")
"Front
L":
Outputs the tone from the front
left-hand side speaker.
"Front R": Outputs the tone from the front
right-hand side speaker.
"Front All": Outputs the tone from the both
front speakers.
[I]
Sets the beep of the incoming call.
([2]
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[]] Sets the beep of the incoming SMS.
([2]
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[§] Returns to the Hands-Free Control screen.
[Z]
Returns to the "Hands Free Setup 1" screen.
[§]
Sets whether to use cell-phone phonebook,
outgoing calls list and incoming calls list.
([2]
"ON")
"ON": Yes.
"OFF":No.
W
Sets the SMS function.
([2]
"ON")
"ON": Use SMS function.
"OFF":SMS not available.
[lQ]
Registers the voice to select phone number
category with voice recognition.
See <Key Word Voice Registration> (page
59).
IT]
Registers the phone number to Hands Free
Control screen preset button.
See <Phone Number Preset> (page 60).
[j]
Returns to the Hands-Free Control screen.
~
~
Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
English. 57