Table of Contents
Advertisement
6
Load the image
1
1
1
1 Rotates the image.
⁄
•
See
<About Picture files> (page 6) for readable image
specifications.
•
The [Memory] button on the "Background" screen
becomes active only in STANDBY source mode.
•
Pressing the [Memory] button on the "Background"
screen switches the AV OUT source to OFF.
For resetting the AV OUT source, refer to <AV Interface
Setup> section.
•
While loading the Background image, any other
operation is prohibited.
Background Change
Selects a image for background.
1
Select Background Change screen
2
Select a image for background
1
1
1
1 Returns to the initial background.
3
Set the image as the background
Panel Color Coordinate
Sets the button illumination color.
1
Display the Color screen
>
Touch [
]
[
]
(page 59)
2
Display the Panel Color Coordinate screen
[Initialize] Initialization resets the settings
made using the Panel Color to the default
settings made at the factory.
[Panel Color Scan] When set to "ON", the
illumination color of the buttons changes one
after another.
⁄
•
When touching [SET] or [Initialize], make sure [Panel
Color Scan] is set to "OFF".
3
Select a color
1
1
1
1 Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([P1] – [P3]).
>
>
[Display]
[Color].
Next page 3
English
65
Hide quick links:
Advertisement
Table of Contents
