Auto Memory; Manual Memory - Kenwood DNX5360 Instruction Manual

Auto Memory

Stores stations with good reception in memory
automatically.
1 Display the Source
See <Source Control Screen> (page 38).
2 Select a band you wish to store in memory
3 Select the Auto Memory mode
4 Start Auto Memory
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
• The operation ends automatically if you do not operate
within 10 seconds.
Control Screen

Manual Memory

Stores the current receiving channel in memory.
1 Display the Source
See <Source Control Screen> (page 38).
2 Select a station you wish to store in
memory
3 Store in memory
2 sec.
Continue to touch until the memory number
appears.
Control Screen
English 39