Frequency Step Setting (Type 4/ 6 Models); Preset Select - Kenwood DNX5360 Instruction Manual

[NAME] Sets a name to the station. (Type 4/6
models only)
See <Set Station Name> (page 35).
[TEXT] Displays Radio Text screen.
FM FM
(Type 2/3 models only)
See <Radio Text> (page 35).
Frequency Step Setting
(Type 4/ 6 models)
Changing the tuning frequency step. The original
setting is FM band 50 kHz, and AM band 9 kHz.
1 Switch the frequency step
While pressing [NAV] (DNX series)/ [TOP] (DDX
series) button and [0] button, press the Reset
button.
Release your fingers from the buttons after the
display appears.
The frequency step changes to FM band 200
kHz, and AM band 10 kHz.

Preset Select

Lists and selects memorized station.
1 Display the Source
See <Source Control Screen> (page 32).
2 Display the Tuner Preset List Screen
3 Select a station
1 1 1
1 Memorized stations are displayed. Touch to
tune in.
[CTRL] Returns to the Source Control screen.
Control Screen
English 33