Controlling Tone-Based Services; Setting Up The Hands-Free Phone - Kenwood DDX8046BT Instruction Manual

Controlling Tone-based Services

Controlling Tone-based Services
Uses tone base service using DTMF (Dual
Tone Multi Frequency).
1 Display the Talking screen
See <Calling by Entering a Phone
Number> (page 62).
2 Display the DTMF input screen
3 You can send tones during a call
DDX series DDX896/ DDX8046BT

Setting Up the Hands-Free Phone

Setting Up the Hands-Free Phone
The Hands-Free system can be set as
follows.
1 Display the Hands-Free Control
screen
See <Making a Call> (page 60).
2 Display the Hands Free Setup screen
3 Set each item
[Auto Response] Sets an automatic
response time to pick-up an incoming
calln. ( "OFF")
"OFF": This function can not use.
"0-99": Sets to calling ring time
(second).
Next page 3 Next page 3
English 65