Making A Call Using Call Records; Calling By Voice Recognition - Kenwood DNX5360 Instruction Manual

Hands-Free Phoning

Making a Call Using Call Records

Calls by selecting a phone number from the
outgoing, incoming, or missed calls list.
1 Display the Hands-Free Control screen
See <Making a call> (page 46).
2 Display the Outgoing Calls, Incoming Calls,
or Missed Calls screen
3 Select from calls list
Example : Outgoing Calls screen
Calls the selected phone number.
4 Make a call
⁄
• The Outgoing Calls list screen, Incoming Calls list,
or Missed Calls list screen shows the list of the calls
originated from or received at this unit. They are not the
ones stored in the cell-phone memory.
48 DNX5360/DNX5360M/DDX5036/DDX5036M

Calling by Voice Recognition

Calls by recognizing the registered voice.
⁄
• In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Registration> (page 51). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Registration> (page 52).
1 Display the Hands-Free Control screen
See <Making a call> (page 46).
2 Display the Voice Recognition screen
7 If there is only one phone number assigned
under the registered name
3 Say the name registered in the Phonebook
When a beep is heard, say the name within 2
seconds.
4 Make a call