Kenwood DNX5360 Instruction Manual page 11

DNX series DNX series
E
DDX series with navigation unit DDX series with navigation unit
7 While watching the playback screen of a visual source
Displays the Easy Control screen.
7 While watching the navigation screen
Displays the Screen Control screen.
7 While watching the screen other than the above
Screen Switching function On/Off.
Rear view display On/Off.*
1 sec.
DDX series without navigation unit DDX series without navigation unit
7 While watching the playback screen of a visual source
Displays the Easy Control buttons.
Rear view display On/Off.*
1 sec.
Hands Free control screen On/Off.
F
Switches the source that is output at the AV OUTPUT
1 sec.
terminal.
Screen Switching Function
Switching between the navigation screen and the source control screen with one touch operation.
⁄
• For DDX series
Screen Switching fuction can be activated when an optional navigation system is connected to this unit.
Connecting an external device to AV-IN jack (DNX5360M only)
Use of the optional cable CA-C3AV is recommended for connecting an external player. When
connecting, make sure to attach the ferritic core supplied with this unit to prevent electromagnetic
noise. If the ferritic core may scratch the vehicle, wrap it with the cushion sheet (Accessory of this
unit).
SRC
R-CAM
FNC
NAV MAP
AV-IN
&
e
!
2
&
2
Approx. 10 cm (3-15/16 inch)
Ferritic core
(Accessory of this unit)
Functions of the buttons on the front panel
⁄
* 2 The function of the [FNC] button
can be changed to the display off
function. See <User Interface> (page
61).
Lock
Banding band
(Accessory of this unit)
English 11