Tuner Setup (Type 2/ 3 Models); Tv Setup - Kenwood DNX5360 Instruction Manual

Tuner Setup (Type 2/ 3 models)

You can set Tuner related parameters.
1 Display the Tuner Setup screen
>
Touch [ ] [ ]
59)
2 Set each item
[NEWS] Sets a news bulletin interrupt time.
( "OFF")
[AF] When station reception is poor,
automatically switches to the station that
is broadcasting the same program over the
same RDS network. (
[Regional] Sets whether to switch to the
station only in the specific region using the
"AF" control. ( "ON")
[Auto TP Seek] When traffic information
station reception is poor, automatically
searches for a station that can be received
better. ( "ON")
[Language Select] Selects a display language
for the PTY function.
[Antenna Control] Allows you to turn off
the RDS fuction to prevent the motor-driven
antenna from extending. (
>
[TUNER SETUP]. (page
"ON")
"ON")

TV Setup

The TV signal receiving areas can be set.
1 Display the TV SETUP screen
>
Touch [ ] [ ]
2 Set each item
[TV1 Area], [TV2 Area] Sets the TV receiving
area. (only when KTC-V300P (optional
accessory) connected)
[On Screen TV] Sets an on-screen display of
the TV screen. ( "Auto")
(only when the optional accessory TV tuner
connected)
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
3 Set up TV (only when KTC-V300P (optional
accessory) connected)
Example : TV1 Area screen
Sets the present TV1 or TV2 receiving area.
>
[TV SETUP]. (page 59)
English 77